CPanel Setup/Installation on Google Cloud
1. Login into Google Cloud Panel account
2. Click "Compute Engine" in main menu
3. Click on "VM Instances"
4. Click on "Create" to create to create New Instance
5. Enter Name of New Instance under "Name" heading
6. Select zone of Instance under "Zone" heading i.e. location which you want to select for you cloud server
7. Select Machine Hardware Configuration under "Machine Type" heading
a) Select list for Basic view
b) Select Customize to configure CPU and RAM for machine manually
8. Under "Boot disk" heading select "operating system/OS" for machine
For CPanel installation use CentOS 7
a) Select "Boot Disk type" and Size of Boot Disk
9. Under "Firewall" heading select "HTTP traffic" and "HTTPs traffic" both
10. Click on "Create" to create your first instance
11. Under "Connect" Column double click on "SSH"
12. To install cpanel system need root access, type sudo -s on command prompt and press enter
13. run yum update for update
14. run yum install perl
15. run yum install wget
16. Set Hostname for instance e.g. hostname name.nameofdomain.com
17. run below command for cpanel installation
cd /home && curl -o latest -L https://securedownloads.cpanel.net/latest && sh latest
for cpanel install
If you face difficulty in typing command then search google for "cpanel installation url" and you will get command from search results as shown in video
Follow below Instructions if you face issue "networkmanager is installed and running" on CentOS7
systemctl stop NetworkManager.service
systemctl disable NetworkManager.service
systemctl enable network.service
systemctl start network.service
Again run cpanel installation command
cd /home && curl -o latest -L https://securedownloads.cpanel.net/latest && sh latest
18. Change password for root access by typing command
passwd
19. Port configuration for WHM and CPanel
WHM Panel ports - 2086, 2087
CPanel ports - 2082, 2083
20. Create a "Firewall Rule" for port opening (step 19 ports)
a) Search firewall in search box and select "Firewall Rule"
b) Click on "Create Firewall Rule"
c) Enter Name of Firewall Rule as "CPanel"
d) Enter any description for that
e) Under "Target" heading select "All Instances in the network"
f) Under "IP Source Range" enter 0.0.0.0/0
g) Under specific protocols and ports enter port "tcp:2082"
h) Click on "create" to create rule
repeat step no 20 for port "tcp:2083"
a) Click on "Create Firewall Rule"
b) Enter Name of Firewall Rule as "CPanel"
c) Enter any description for that
d) Under "Target" heading select "All Instances in the network"
e) Under "IP Source Range" enter 0.0.0.0/0
f) Under specific protocols and ports enter port "tcp:2083"
g) Click on "create" to create rule
for WHM port 2086
a) Click on "Create Firewall Rule"
b) Enter Name of Firewall Rule as "CPanel"
c) Enter any description for that
d) Under "Target" heading select "All Instances in the network"
e) Under "IP Source Range" enter 0.0.0.0/0
f) Under specific protocols and ports enter port "tcp:2086"
g) Click on "create" to create rule
for WHM for 2087
a) Click on "Create Firewall Rule"
b) Enter Name of Firewall Rule as "CPanel"
c) Enter any description for that
d) Under "Target" heading select "All Instances in the network"
e) Under "IP Source Range" enter 0.0.0.0/0
f) Under specific protocols and ports enter port "tcp:2087"
g) Click on "create" to create rule
21. To access WHM panel copy ip address mentioned under "External Ip" and mentioned port 2087.
e.g. https://domainname:2087
22. Enter username as "root"
Password - Use same password which you set as "Step No 18"
23. Click on "I Agree Go to Step 2" button at bottom
24. On "Contact Information" page mentioned your email id in "Server Contact Email Address"
25. Copy "Primary Resolver" ip address and paste it in "Secondary Resolver"
26. Click on "Save and Go to Step 3"
27. Click on "Save and Go to Step 4"
28. Go to Bottom of page and click on check box "Configure Address Records for Nameservers"
29. Copy ip address from "IP for Entry" and paste it on "IPv4" entry box
30. Click on check box Add "A Entries" for Hostname
31. Click on "Save and Go to Step 5"
32. Click on "Save and Go to Step 6"
33. Click on "Finish Setup Wizard"
34. Enable "PHP-FPM Service for CPanel"
Installation Complete
Comments
Post a Comment